免gg修改器root_gg修改器root软件下载-gg修改器免root版

应用详情

GG修改器破解版下载地址：https://ghb2023zs.bj.bcebos.com/d/z/p/d/dbzs?GGXGQ

大家好，今天小编为大家分享关于免gg修改器root_gg修改器root软件下载的内容，赶快来一起来看看吧。

环境：

windows 10 ,64位
vm: vmware pro 15
ubuntu 18.04
buildroot : 2016.11 rc1
file命令源码：file-5.08

buildroot下载地址：https://buildroot.org/downloads/

file命令下载地址：ftp://ftp./pub/file

过程：

解压buildroot-2016.11-rc1.tar.gz到/home/biren/buildroot-2016.11-rc1目录

biren@ubuntu:~/buildroot-2016.11-rc1$ ls arch CHANGES COPYING fs Makefile.legacy support board Config.in DEVELOPERS host output system boot Config.in.legacy dl linux package toolchain build configs docs Makefile README

arch/是架构
configs/是适用各种板的配置文件
output/是编译后生产的文件存放地
host/是编译后生产的编译工具存放地

生成一个默认配置文件.config :

make qemu_aarch64_virt_defconfig (找一个预配置好的config文件,在configs文件夹里找)

biren@ubuntu:~/buildroot-2016.11-rc1$ make qemu_aarch64_virt_defconfig

make menuconfig 详细配置参数调整：

Target options —> 这是设置被编译出来的程序在什么样架构的机器上运行

Build options ：

Download dir是下载的源码文件存放地

将Host dir修改为/home/biren/bttool (路径可自定义)，即生成的交叉编译工具将存放在此。

原来的host dir :

修改后的host dir :

Mirrors and Download locations —> 从这些地址中下载源码文件

（可预先下载后放入此目录）

libraries (shared only) —> 将此处的shared only 改为both static and shared

第一次编译时就是没有改，导致不能将程序编译成静态的

Toolchain ：工具链配置

Toolchain type (Buildroot toolchain) —>

以下几项版本配置根据自己需求选择：

Custom kernel headers series (3.10.x) —>
glibc version (2.23) —>
Binutils Version (binutils 2.25.1) —>
piler Version (gcc 4.9.x) —>

我的旧手机配置是：

127|root@GiONEE_GBL7319:/system/bin # cat /proc/version Linux version 3.10.65+ (android@android6) (gcc version 4.9 20140514 (mtk-20150408) (GCC) ) #1 SMP PREEMPT Tue Jun 30 05:59:41 HKT 2015

127|root@GiONEE_GBL7319:/system/bin # busybox uname -a Linux localhost 3.10.65+ #1 SMP PREEMPT Tue Jun 30 05:59:41 HKT 2015 aarch64 GNU/Linux

选上 “Enable C++ support”

System configuration —>

Kernel —> 选择合适版本，此处选填3.10.65

Target packages ：大部分默认

Compressors and pressors —>

其它参数先保持默认的

save ：

开始编译：时长1-2小时

biren@ubuntu:~/buildroot-2016.11-rc1$ make

问题一：

Unescaped left brace in regex is illegal here in regex; marked by <– HERE in m/${ <– HERE ([^ =:+{}]+)}

...... >>> lzo 2.09 Autoreconfiguring libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, ’autoconf’. libtoolize: copying file ’autoconf/ltmain.sh’ libtoolize: Consider adding ’AC_CONFIG_MACRO_DIRS([m4])’ to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding ’-I m4’ to ACLOCAL_AMFLAGS in Makefile.am. Unescaped left brace in regex is illegal here in regex; marked by <-- HERE in m/${ <-- HERE ([^ =:+{}]+)}/ at /home/biren/bttool/usr/bin/automake line 3936. autoreconf: /home/biren/bttool/usr/bin/automake failed with exit status: 255 package/pkg-generic.mk:206: recipe for target ’/home/biren/buildroot-2016.11-rc1/output/build/lzo-2.09/.stamp_configured’ failed make[1]: *** [/home/biren/buildroot-2016.11-rc1/output/build/lzo-2.09/.stamp_configured] Error 1 Makefile:76: recipe for target ’_all’ failed make: *** [_all] Error 2

原因：

2016版本较旧，正则表达式语法有些差异，不支持旧的写法

解决：

将/home/biren/bttool/usr/bin/automake文件3936行处的

$text =~ s/${([^ =:+{}]+)}/

修改为$text =~ s/$[{]([^ =:+[{]}]+)}/

（即将第一个左大括号用中括号括起来）

再次运行make（不要make clean,要不然又要编译个把小时）,正常结束。

生成的Linux系统可直接写入相应的板子上即可运行。

以下与交叉编译相关：

生成的交叉编译工具放在如下目录里：

/home/biren/bttool/usr/

biren@ubuntu:~/filecmd/file-5.08$ ll /home/biren/bttool/usr total 32 drwxr-xr-x 8 biren biren 4096 Apr 14 12:04 ./ drwxr-xr-x 4 biren biren 4096 Apr 14 14:34 ../ drwxr-xr-x 7 biren biren 4096 Apr 14 13:28 aarch64-jwj-linux-gnu/ drwxr-xr-x 2 biren biren 4096 Apr 14 14:34 bin/ drwxr-xr-x 3 biren biren 4096 Apr 14 14:34 include/ drwxr-xr-x 6 biren biren 4096 Apr 14 14:34 lib/ drwxr-xr-x 4 biren biren 4096 Apr 14 12:27 libexec/ drwxr-xr-x 15 biren biren 4096 Apr 14 14:34 share/

bin部分内容：

biren@ubuntu:~/filecmd/file-5.08$ ll /home/biren/bttool/usr/bin total 28896 -rwxr-xr-x 1 biren biren 1135448 Apr 14 12:07 aarch64-jwj-linux-gnu-addr2line* -rwxr-xr-x 2 biren biren 1169032 Apr 14 12:07 aarch64-jwj-linux-gnu-ar* -rwxr-xr-x 2 biren biren 1760440 Apr 14 12:07 aarch64-jwj-linux-gnu-as* lrwxrwxrwx 1 biren biren 17 Apr 14 13:28 aarch64-jwj-linux-gnu-c++ -> toolchain-wrapper* -rwxr-xr-x 2 biren biren 972336 Apr 14 13:28 aarch64-jwj-linux-gnu-c++.br_real* lrwxrwxrwx 1 biren biren 17 Apr 14 13:28 aarch64-jwj-linux-gnu-cc -> toolchain-wrapper* -rwxr-xr-x 3 biren biren 968144 Apr 14 13:28 aarch64-jwj-linux-gnu-cc.br_real* -rwxr-xr-x 1 biren biren 1130320 Apr 14 12:07 aarch64-jwj-linux-gnu-c++filt* lrwxrwxrwx 1 biren biren 17 Apr 14 13:28 aarch64-jwj-linux-gnu-cpp -> toolchain-wrapper* -rwxr-xr-x 1 biren biren 968192 Apr 14 13:28 aarch64-jwj-linux-gnu-cpp.br_real* -rwxr-xr-x 1 biren biren 37856 Apr 14 12:07 aarch64-jwj-linux-gnu-elfedit* lrwxrwxrwx 1 biren biren 17 Apr 14 13:28 aarch64-jwj-linux-gnu-g++ -> toolchain-wrapper* -rwxr-xr-x 2 biren biren 972336 Apr 14 13:28 aarch64-jwj-linux-gnu-g++.br_real* lrwxrwxrwx 1 biren biren 17 Apr 14 13:28 aarch64-jwj-linux-gnu-gcc -> toolchain-wrapper* lrwxrwxrwx 1 biren biren 17 Apr 14 13:28 aarch64-jwj-linux-gnu-gcc-4.9.4 -> toolchain-wrapper* ... lrwxrwxrwx 1 biren biren 31 Apr 14 13:28 aarch64-linux-addr2line -> aarch64-jwj-linux-gnu-addr2line* lrwxrwxrwx 1 biren biren 24 Apr 14 13:28 aarch64-linux-ar -> aarch64-jwj-linux-gnu-ar* lrwxrwxrwx 1 biren biren 24 Apr 14 13:28 aarch64-linux-as -> aarch64-jwj-linux-gnu-as* lrwxrwxrwx 1 biren biren 17 Apr 14 13:28 aarch64-linux-gcc -> toolchain-wrapper* lrwxrwxrwx 1 biren biren 17 Apr 14 13:28 aarch64-linux-gcc-4.9.4 -> toolchain-wrapper* -rwxr-xr-x 2 biren biren 36846 Apr 14 13:41 aclocal* -rwxr-xr-x 2 biren biren 36846 Apr 14 13:41 aclocal-1.15* -rwxr-xr-x 1 biren biren 14786 Apr 14 13:41 autoconf* -rwxr-xr-x 1 biren biren 8572 Apr 14 13:41 autoheader* -rwxr-xr-x 1 biren biren 32232 Apr 14 13:41 autom4te* -rwxr-xr-x 2 biren biren 253228 Apr 14 14:31 automake* -rwxr-xr-x 2 biren biren 253228 Apr 14 14:31 automake-1.15* -rwxr-xr-x 1 biren biren 21140 Apr 14 13:41 autoreconf* -rwxr-xr-x 1 biren biren 17179 Apr 14 13:41 autoscan* -rwxr-xr-x 1 biren biren 33946 Apr 14 13:41 autoupdate* -rwxr-xr-x 1 biren biren 667312 Apr 14 12:04 gawk* -rwxr-xr-x 1 biren biren 4148 Apr 14 13:41 ifnames* -rwxr-xr-x 1 biren biren 3189 Apr 14 12:04 igawk* -rwxr-xr-x 1 biren biren 169184 Apr 14 14:34 kmod* -rwxr-xr-x 1 biren biren 365520 Apr 14 13:41 libtool* -rwxr-xr-x 1 biren biren 129267 Apr 14 13:41 libtoolize* -rwxr-xr-x 1 biren biren 180784 Apr 14 12:08 m4* -rwxr-xr-x 1 biren biren 58296 Apr 14 14:34 pkgconf* -rwxr-xr-x 1 biren biren 323 Apr 14 14:34 pkg-config* -rwxr-xr-x 1 biren biren 10448 Apr 14 13:28 toolchain-wrapper*

查看gcc版本：

命令：aarch64-jwj-linux-gnu-gcc -v

biren@ubuntu:~/filecmd/file-5.08$ /home/biren/bttool/usr/bin/aarch64-jwj-linux-gnu-gcc -v Using built-in specs. COLLECT_GCC=/home/biren/bttool/usr/bin/aarch64-jwj-linux-gnu-gcc.br_real COLLECT_LTO_WRAPPER=/home/biren/bttool/usr/libexec/gcc/aarch64-jwj-linux-gnu/4.9.4/lto-wrapper Target: aarch64-jwj-linux-gnu Configured with: ./configure --prefix=/home/biren/bttool/usr --sysconfdir=/home/biren/bttool/etc --enable-static --target=aarch64-jwj-linux-gnu --with-sysroot=/home/biren/bttool/usr/aarch64-jwj-linux-gnu/sysroot --disable-__cxa_atexit --with-gnu-ld --disable-libssp --disable-multilib --with-gmp=/home/biren/bttool/usr --with-mpc=/home/biren/bttool/usr --with-mpfr=/home/biren/bttool/usr --with-pkgversion=’Buildroot 2016.11-rc1’ --with-bugurl=http://bugs.buildroot.net/ --disable-libquadmath --enable-tls --disable-libmudflap --enable-threads --without-isl --without-cloog --disable-decimal-float --enable-languages=c,c++ --with-build-time-tools=/home/biren/bttool/usr/aarch64-jwj-linux-gnu/bin --enable-shared --disable-libgomp Thread model: posix gcc version 4.9.4 (Buildroot 2016.11-rc1)

配置交叉编译链工具：

配置path:

biren@ubuntu:~/bttool/usr$ export ARMHOME=/home/biren/bttool/usr biren@ubuntu:~/bttool/usr$ export PATH=$ARMHOME:$ARMHOME/bin:$ARMHOME/libexec/gcc/aarch64-jwj-linux-gnu/4.9.4:$ARMHOME/aarch64-jwj-linux-gnu/bin:$PATH

下载并解压file-5.08.tar.gz到file-5.08目录里

编译file命令：

配置configure参数并生成Makefile：

export ARMPREFIX=aarch64-jwj-linux-gnu-

./configure –host=arm-linux –enable-static –disable-shared CC=${ARMPREFIX}gcc AS=${ARMPREFIX}as LD=${ARMPREFIX}ld AR=${ARMPREFIX}ar RANLIB=${ARMPREFIX}ranlib

biren@ubuntu:~/filecmd/file-5.08$ export ARMPREFIX=aarch64-jwj-linux-gnu- biren@ubuntu:~/filecmd/file-5.08$ ./configure --host=arm-linux --enable-static --disable-shared CC=${ARMPREFIX}gcc AS=${ARMPREFIX}as LD=${ARMPREFIX}ld AR=${ARMPREFIX}ar RANLIB=${ARMPREFIX}ranlib configure: WARNING: if you wanted to set the --build type, don’t use --host. If a piler is detected then pile mode will be used checking for a patible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-linux-strip... no 。。。。。。 checking for gzopen in -lz... no configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating magic/Makefile config.status: creating tests/Makefile config.status: creating doc/Makefile config.status: creating python/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing mands config.status: executing mands

修改Makefile、file.c参数：

将file-5.08下的file-5.08/src/Makefile中的

CFLAGS = -g -O2

修改为CFLAGS = -g -O2 –static

将file-5.08/src/file.c里的

const char *magicfile = NULL;

修改为const char *magicfile = “/system/bin/Magdir.mgc”;

运行make :

问题一：

funcs.c:34:21: fatal error: p.h: No such file or directory

readelf.c:372:13: warning: ‘nh32.n_type’ may be used uninitialized in this function [-Wmaybe-uninitialized] Elf32_Nhdr nh32; ^ CC print.lo CC fsmagic.lo CC funcs.lo funcs.c:34:21: fatal error: p.h: No such file or directory compilation terminated. make[2]: *** [funcs.lo] Error 1 make[2]: Leaving directory `/home/biren/filecmd/file-5.08/src’ make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/biren/filecmd/file-5.08’ make: *** [all] Error 2

解决：

将/home/biren/filecmd/file-5.08/src/funcs.c里的这句

#include <p.h>注释掉

问题二：

magic Cannot use the installed version of file (5.32) to pile file 5.08

Please install file 5.08 locally first

大意是：不能用当前系统file（版本5.32）命令的magic，请先安装5.08版本的file命令到本系统(即要求当前系统file命令的版本要与将编译的版本一致)

...... CC readcdf.lo CCLD libmagic.la CC file.o CCLD file make[2]: Leaving directory ’/home/biren/filecmd/file-5.08/src’ Making all in magic make[2]: Entering directory ’/home/biren/filecmd/file-5.08/magic’ Cannot use the installed version of file (5.32) to pile file 5.08 Please install file 5.08 locally first Makefile:656: recipe for target ’magic.mgc’ failed make[2]: *** [magic.mgc] Error 1 make[2]: Leaving directory ’/home/biren/filecmd/file-5.08/magic’ Makefile:304: recipe for target ’all-recursive’ failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory ’/home/biren/filecmd/file-5.08’ Makefile:233: recipe for target ’all’ failed make: *** [all] Error 2

解决：

先用不带参数的编译、安装file 5.08到当前系统上：

目的是生成5.08版本的magic文件

彻底清除：包括Makefile等生成的文件

命令： make distclean

biren@ubuntu:~/filecmd/file-5.08$ make distclean Making distclean in python make[1]: Entering directory ’/home/biren/filecmd/file-5.08/python’ rm -rf .libs _libs 。。。

修改file-5.08/src/file.c ：

将const char *magicfile = NULL;

修改为 const char *magicfile = “/usr/local/file5.08/magic/Magdir.mgc”;

运行 ./configure –prefix=/usr/local/file5.08

biren@ubuntu:~/filecmd/file-5.08$ ./configure --prefix=/usr/local/file5.08

make :

biren@ubuntu:~/filecmd/file-5.08$ make

安装： sudo make install

biren@ubuntu:~/filecmd/file-5.08$ sudo make install [sudo] password for biren: Making install in src make[1]: Entering directory ’/home/biren/filecmd/file-5.08/src’ make[2]: Entering directory ’/home/biren/filecmd/file-5.08/src’ test -z "/usr/local/file5.08/lib" || /bin/mkdir -p "/usr/local/file5.08/lib" /bin/bash ../libtool --mode=install /usr/bin/install -c libmagic.la ’/usr/local/file5.08/lib’ libtool: install: /usr/bin/install -c .libs/libmagic.so.1.0.0 /usr/local/file5.08/lib/libmagic.so.1.0.0 libtool: install: (cd /usr/local/file5.08/lib && { ln -s -f libmagic.so.1.0.0 libmagic.so.1 || { rm -f libmagic.so.1 && ln -s libmagic.so.1.0.0 libmagic.so.1; }; }) libtool: install: (cd /usr/local/file5.08/lib && { ln -s -f libmagic.so.1.0.0 libmagic.so || { rm -f libmagic.so && ln -s libmagic.so.1.0.0 libmagic.so; }; }) libtool: install: /usr/bin/install -c .libs/libmagic.lai /usr/local/file5.08/lib/libmagic.la libtool: install: /usr/bin/install -c .libs/libmagic.a /usr/local/file5.08/lib/libmagic.a libtool: install: chmod 644 /usr/local/file5.08/lib/libmagic.a libtool: install: ranlib /usr/local/file5.08/lib/libmagic.a libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin:/sbin" ldconfig -n /usr/local/file5.08/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/file5.08/lib ...... make[2]: Nothing to be done for ’install-data-am’. make[2]: Leaving directory ’/home/biren/filecmd/file-5.08’ make[1]: Leaving directory ’/home/biren/filecmd/file-5.08’

文件安装到/usr/local/file5.08目录下：

biren@ubuntu:/usr/local/file5.08$ ls bin include lib magic share

新建magic目录：

biren@ubuntu:~/filecmd/file-5.08/src$ sudo mkdir /usr/local/file5.08/magic

将源文件Magdir目录及里面文件一起复制到新建的magic目录下：

biren@ubuntu:~/filecmd/file-5.08$ sudo cp -r ./magic/Magdir /usr/local/file5.08/magic/

用刚编译好的file命令（5.08版）生成Magdir.mgc文件：

命令：file -C -m Magdir

biren@ubuntu:/usr/local/file5.08/magic$ sudo ../bin/file -C -m Magdir

测试file 5.08 :

biren@ubuntu:/usr/local/file5.08$ bin/file -v file-5.08 magic file from /usr/local/file5.08/magic/Magdir.mgc

biren@ubuntu:/usr/local/file5.08$ bin/file /bin/ls /bin/ls: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 3.2.0, BuildID[sha1]=0xa2f96795d7f4668e31af4becd068bfcfe60a0f41, stripped

5.08版本与5.32版本对比：

biren@ubuntu:/usr/local/file5.08$ file bin/file 5.08版本的 bin/file: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=594d8d43640f7492fb3a6c8f2417565a5e52883e, with debug_info, not stripped biren@ubuntu:/usr/local/file5.08$ file /usr/bin/file 5.32版本的 /usr/bin/file: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=2b26928f841d92afa31613c2c916a3abc96bbed8, stripped

用update-alternatives命令配置使当前系统使用file 5.08版本：

将5.32的file改名： biren@ubuntu:/usr/local/file5.08$ sudo mv /usr/bin/file /usr/bin/file5.32 注册： biren@ubuntu:/usr/local/file5.08$ sudo update-alternatives --install /usr/bin/file file /usr/bin/file5.32 400 update-alternatives: using /usr/bin/file5.32 to provide /usr/bin/file (file) in auto mode biren@ubuntu:/usr/local/file5.08$ sudo update-alternatives --install /usr/bin/file file /usr/local/file5.08/bin/file 300 配置： biren@ubuntu:/usr/local/file5.08$ sudo update-alternatives --config file There are 2 choices for the alternative file (providing /usr/bin/file).


  Selection    Path                          Priority   Status

------------------------------------------------------------

* 0            /usr/bin/file5.32              400       auto mode

  1            /usr/bin/file5.32              400       manual mode

  2            /usr/local/file5.08/bin/file   300       manual mode

Press <enter> to keep the current choice[*], or type selection number: 2 update-alternatives: using /usr/local/file5.08/bin/file to provide /usr/bin/file (file) in manual mode 验证： biren@ubuntu:/usr/local/file5.08$ file -v file-5.08 magic file from /usr/local/file5.08/magic/Magdir.mgc

重新用交叉编译链工具编译file 5.08源码 :（在旧手机上使用）

彻底删除原编译产生的文件：

biren@ubuntu:~/filecmd/file-5.08$ make distclean

执行./configure :

–host=arm-linux表示在什么机器上使用

–enable-static表示编译成静态的，因为手机上缺乏各种动态库

biren@ubuntu:~/filecmd/file-5.08$ ./configure --host=arm-linux --enable-static --disable-shared CC=${ARMPREFIX}gcc AS=${ARMPREFIX}as LD=${ARMPREFIX}ld AR=${ARMPREFIX}ar RANLIB=${ARMPREFIX}ranlib

修改Makefile :

文件在/home/biren/filecmd/file-5.08/src/

将CFLAGS = -g -O2

改为 CFLAGS = -g -O2 –static

修改 file.c :

文件在 /home/biren/filecmd/file-5.08/src/

将 const char *magicfile = NULL;

修改为 const char *magicfile = “/system/bin/Magdir.mgc”;

运行 make :

biren@ubuntu:~/filecmd/file-5.08$ make make all-recursive make[1]: Entering directory ’/home/biren/filecmd/file-5.08’ Making all in src make[2]: Entering directory ’/home/biren/filecmd/file-5.08/src’ CC magic.lo CC apprentice.lo ..... sed -e s@__CSECTION__@1@g -e s@__FSECTION__@4@g -e s@__VERSION__@5.08@g -e s@__MAGIC__@/usr/local/share/misc/magic@g ./libmagic.man > libmagic.3 make[2]: Leaving directory ’/home/biren/filecmd/file-5.08/doc’ Making all in python make[2]: Entering directory ’/home/biren/filecmd/file-5.08/python’ make[2]: Nothing to be done for ’all’. make[2]: Leaving directory ’/home/biren/filecmd/file-5.08/python’ make[2]: Entering directory ’/home/biren/filecmd/file-5.08’ make[2]: Leaving directory ’/home/biren/filecmd/file-5.08’ make[1]: Leaving directory ’/home/biren/filecmd/file-5.08’

恢复当前系统的file 5.32版本：

biren@ubuntu:~/filecmd/file-5.08$ sudo update-alternatives --auto file update-alternatives: using /usr/bin/file5.32 to provide /usr/bin/file (file) in auto mode biren@ubuntu:~/filecmd/file-5.08$ sudo update-alternatives --display file file - auto mode link best version is /usr/bin/file5.32 link currently points to /usr/bin/file5.32 link file is /usr/bin/file /usr/bin/file5.32 - priority 400 /usr/local/file5.08/bin/file - priority 300 biren@ubuntu:~/filecmd/file-5.08$ file -v file-5.32 magic file from /etc/magic:/usr/share/misc/magic

查验结果：

ELF 64-bit LSB executable, ARM aarch64, version 1 (SYSV), statically linked

biren@ubuntu:~/filecmd/file-5.08$ file ./src/file ./src/file: ELF 64-bit LSB executable, ARM aarch64, version 1 (SYSV), statically linked, for GNU/Linux 3.10.0, with debug_info, not stripped

用adb push命令将file和Magdir目录及Magdir里面的所有文件都传到手机/system/bin/里：

c: mpfastboot>adb push file /sdcard file: 1 file pushed. 3.8 MB/s (1246776 bytes in 0.316s)


c:	mpfastboot>adb push Magdir /sdcard

Magdir: 227 files pushed. 0.9 MB/s (604844 bytes in 0.656s)
c:	mpfastboot>adb shell

shell@GiONEE_GBL7319:/ $ su

1|root@GiONEE_GBL7319:/ # mount -rw -o remount /system

1|root@GiONEE_GBL7319:/ # mkdir /system/bin/Magdir

root@GiONEE_GBL7319:/ # mv /sdcard/file /system/bin

root@GiONEE_GBL7319:/ # cp /sdcard/Magdir/*  /system/bin/Magdir

1|root@GiONEE_GBL7319:/system/bin # ll file -rwxr-xr-x root sdcard_r 1246776 2022-04-14 20:38 file root@GiONEE_GBL7319:/system/bin # ll Magdir -rw-r----- root root 2197 2022-04-14 21:06 acorn -rw-r----- root root 425 2022-04-14 21:06 adi -rw-r----- root root 3980 2022-04-14 21:06 adventure -rw-r----- root root 402 2022-04-14 21:06 allegro -rw-r----- root root 760 2022-04-14 21:06 alliant -rw-r----- root root 386 2022-04-14 21:06 amanda -rw-r----- root root 2253 2022-04-14 21:06 amigaos -rw-r----- root root 37813 2022-04-14 21:06 animation -rw-r----- root root 276 2022-04-14 21:06 apl ......

制作mgc文件：

命令： file -C -m Magdir

root@GiONEE_GBL7319:/system/bin # file -C -m Magdir root@GiONEE_GBL7319:/system/bin # ll Magdir.mgc -rw-r--r-- root root 2213976 2022-04-14 21:10 Magdir.mgc

查看file命令版本：

root@GiONEE_GBL7319:/system/bin # file -v file-5.08 magic file from /system/bin/Magdir.mgc

使用file命令：

root@GiONEE_GBL7319:/system/bin # file toolbox toolbox: ELF 64-bit LSB shared object, version 1 (SYSV), dynamically linked (uses shared libs), stripped root@GiONEE_GBL7319:/system/bin # file /system/xbin/busybox /system/xbin/busybox: ELF 32-bit LSB executable, ARM, version 1 (SYSV), statically linked, stripped

以上就是关于免gg修改器root_gg修改器root软件下载的全部内容，感谢大家的浏览观看，如果你喜欢本站的文章可以CTRL+D收藏哦。